![]() ![]() The large fan on the side panel has a molex connector and the speed is fixed (unless you add a hardware controller) but due to it's large size and relatively low spin speedit is very quiet already.) It sounds like your has become disconnected - to connect it, just connect that female socket to a spare molex plug (the sort that useed to be used for hard-drives). The Channel fan - you're front fan in this case - should respond to Q-fan. ![]() ![]() The CPU fan speed is controlled through PWM based on the tempeture of the CPU but should still respond to Q-Fan. The PWR connector is usually not controllable by BIOS - it only reports sipn speeds rather than setting them - as it was originally intended for a fw PSU's that have a fly-lead to give that info to the mobo. I just looked at the owner's manual for that board and it only has three fan connectors - one pwr fan at the rear, one cou fan at the top and a single channel fan at the lower front. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |